Written by Raj
Test Manager
Rational TestManager - Executing the Test Script
Running the Test Suite
To run the test
suite, click on the toolbar button that looks like a running man.
The following
window opens:
Click the
Options button
Make sure the
options are set according to the following screen-shot
Click OK on the
Options window and on the Test Suite window to begin running the suite
Running the Manual Test
This brings up
the first ManualTest script.
Normally, we
would perform each step with the program to be tested, marking each
verification as pass or failed, but for our tutorial, let us simple pretend we
have actually done each step
On the First
ManualTest script, mark each step with a check mark under results, and the
verification point as Pass as shown and click done.
On the Second
ManualTest script, mark each step with a check mark under results, but mark the
verification point as Fail as shown.
Under Result
Details, fill out a detail like The order history did not match the order.
Click Done
This will bring up
the Test Log with the results displayed.
Analyzing Test Results
The Test Log with
the result of the test will come up.
Since one of our
tests passed and the other failed, this will be reflected in the Test Log
Even if a single
verification point fails in a test, the entire test will reflect as Failed.
Click the Details
tab at the bottom of the Log.
You can expand the
test cases to see the steps and exactly which Verification point failed.
You can also right
click on a failed verification point and click properties to see the failure
details.
After reviewing
the test results, click the Test case Results tab at the bottom of the Log.
We can now promote
the results for reporting. To do this check the Promoted check boxes.
Close the Test
Log, and when prompted to save the test case results, select Yes.
Report & Monitor Test Progress
Predefined Reports
TestManager has
several predefined reports that can be run to keep track of testing progress
and results.
To see a list of
predefined reports available, click the Analysis tab on the Left Pane
Test Distribution Report
Expand the folder
called Test Case Distribution
These reports
provide information on test progress against test inputs or the test plan.
Right click on the
report titled Test Input Development Coverage and select Run
This will bring up
the window shown on the bottom right.
This report shows
the requirements we wrote earlier along with the number of Test Cases for each
requirement and the number of these that have been implemented, ie have a Test
Script associated with it.
Test Case Results Report
Expand the folder
called Test Case Results Distribution
These reports provide
information on results of the Test Cases we defined.
Right click on the
report titled Test Plan Execution Coverage and select Run
In the Select Test
Logs window, expand until you see our Test Suite Classics Online Test Suite
and move it to the Selected Test Logs group.
Test Case Results Report:
The following
report will be generated for you.
This report shows
you the number of Test Cases implemented in the particular suite as well as
whether the passed or failed
You can also
create custom reports to generate reports according to the requirements of your
specific project
